Help please laser head has lost power

Moderators: HPC, Daven

Post Reply
titchmccartney1
Posts: 10
Joined: Mon Apr 02, 2012 8:53 pm
Contact:
Contact titchmccartney1

Help please laser head has lost power

Post by titchmccartney1 »

Hi everyone

I have an LS3020 and tonight i pressed the emergency stop button and since then the head has no power. The light, compressor and water pump all work. When i have pressed this button before once release the x\y position has reset and been fine . Please could someone help me sort this out.

Thanks in advance

Richard
Top
Daven
Posts: 1635
Joined: Fri Oct 15, 2010 6:44 pm
Location: Devon
Contact:
Contact Daven

Re: Help please laser head has lost power

Post by Daven »

Hi Richard,

Give HPC a call - if the doors switches are ok it could be a problem on the power supply side or controller board ;)

Best

Dave
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Top
titchmccartney1
Posts: 10
Joined: Mon Apr 02, 2012 8:53 pm
Contact:
Contact titchmccartney1

Re: Help please laser head has lost power

Post by titchmccartney1 »

I have spoken with them today. It could be a number of things so im taking it in tomorrow. Ill let you know what happens
Top
titchmccartney1
Posts: 10
Joined: Mon Apr 02, 2012 8:53 pm
Contact:
Contact titchmccartney1

Re: Help please laser head has lost power

Post by titchmccartney1 »

Yes it was the power supply. Had it changed and all is back to normal.
Top
Post Reply

Return to “Help or advice required please”

Who is online

Users browsing this forum: No registered users and 65 guests