Scaling Issues on LS1290
-
- Posts: 2
- Joined: Fri Jan 24, 2020 3:18 pm
- Contact:
Scaling Issues on LS1290
I am having issues with scaling. Laser cutter is cutting dxf files 25% larger than original design. Design in 2D Design. Export as dxf file and then import into Lasercutter 5.3. Have checked designs are created in metric. Can anyone advice?
Re: Scaling Issues on LS1290
I don't know 2D design but if you want to pm me the dxf I will load it and see if it is the same on my software .
Best
Dave
Best
Dave
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Who is online
Users browsing this forum: No registered users and 1 guest