Communication Broken
-
- Posts: 30
- Joined: Sun Mar 13, 2016 8:58 am
- Contact:
Communication Broken
I have just bought a new laptop, when I plug the cable in and try to add a new cutting file I keep getting the communication is broken error all the time. It is windows 10 but was running 10 on old laptop no problem. Just tried my old computer and it's working fine what can I do to make it work, getting frustrated lol Thanks Chris
Re: Communication Broken
You need to install/update the drivers for the laser. Best done through Device Manager.
HPC
HPC
-
- Posts: 30
- Joined: Sun Mar 13, 2016 8:58 am
- Contact:
Re: Communication Broken
What will it come under in the device manager please?
Re: Communication Broken
If it needs updating, it normally shows as Other Devices as EZ-USB FX2.
Moves to USBs as LTSlave USB Driver once it is working.
HPC
Moves to USBs as LTSlave USB Driver once it is working.
HPC
-
- Posts: 30
- Joined: Sun Mar 13, 2016 8:58 am
- Contact:
Re: Communication Broken
It's not installed but when I click on update driver it says it can't find one? And if I know the manufacturer of the device visit their website!
Re: Communication Broken
When you select update driver click on 'Browse my computer for driver software' and point to the folder on the installation CD
Best
Dave
Best
Dave
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
-
- Posts: 30
- Joined: Sun Mar 13, 2016 8:58 am
- Contact:
Re: Communication Broken
A million thanks Dave that worked fine, all up and running thank goodness, I would have never done that on my own Thanks Chris
Re: Communication Broken
Glad it's ok now
Cheers
Dave
Cheers
Dave
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
-
- Posts: 30
- Joined: Sun Mar 13, 2016 8:58 am
- Contact:
Re: Communication Broken
So am I lol
Who is online
Users browsing this forum: Semrush [Bot] and 0 guests