HPC LS6840 pro focus length clarification
Posted: Fri Mar 17, 2017 2:23 pm
Hi All,
I have an LS6840 Pro machine, and whilst doing a routine clean of the mirrors and lens I thought I would check the calibration of the two laser pointers for focus length.
I looked online and saw reference that the optimum distance from workpiece to step above air assist cone should be 41mm, however the focus tool that I got with the machine is 57mm.
Could someone please clarify the correct height for me?
Thanks
Paul
I have an LS6840 Pro machine, and whilst doing a routine clean of the mirrors and lens I thought I would check the calibration of the two laser pointers for focus length.
I looked online and saw reference that the optimum distance from workpiece to step above air assist cone should be 41mm, however the focus tool that I got with the machine is 57mm.
Could someone please clarify the correct height for me?
Thanks
Paul