LEAVE LASER ON/OFF ALL DAY
LEAVE LASER ON/OFF ALL DAY
Hi I'm using the machines on off all day. Is it best to leave them switched on all day or turn them off to rest for an hour at a time. They are probably used 2-3 hours a day 1/2 hour at a time.
Re: LEAVE LASER ON/OFF ALL DAY
50/50 I would guess - turning on and off can spike the components on the boards which may not help. I doubt standing on doing nothing will do any harm or use much power but is not as safe as switching off (depending on environment).
Best
Dave
Best
Dave
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
-
- Posts: 159
- Joined: Thu Apr 03, 2014 10:17 pm
- Contact:
Re: LEAVE LASER ON/OFF ALL DAY
Chiller on 24/7 and laser on until finished, switching on and off throughout the day could cause more problems than help.
60W LS6840 & CW4000
started out with LS3040
started out with LS3040
Who is online
Users browsing this forum: No registered users and 0 guests