Hi.
my current supplier has downgraded their material to BB grade (which is far from acceptable for my products).
I am (desperately) looking for a new supplier of 6mm laser grade birch plywood, preferably supplied in 600 X 300 cut sheets... I need a high quality material that is mainly free from plugs on both sides (I can live with the odd plug on a single side, but not on every sheet)
Any recommendations? I am more than happy to purchase in bulk... a storage problem for cost effective material is a problem I am happy to address...
I have considered HPC laser ply, but they are relatively expensive and I do not know what the quality is like... (Cost is important, as my margins are already a little thin, and an increase in material cost would require a fundamental review of my pricing structure)
Thanks in advance
Regards
Tim
6mm Birch Plywood
-
- Posts: 152
- Joined: Sun Jan 18, 2015 6:38 pm
- Contact:
6mm Birch Plywood
LS3060 PLUS with a 60w tube, Chiller and Bofa filter
Online Store http://www.t2kreations.co.uk
Personal Website... http://www.timbobtastic.com
Online Store http://www.t2kreations.co.uk
Personal Website... http://www.timbobtastic.com
Re: 6mm Birch Plywood
I use SLEC Ltd as I have a storage issue but you could try http://www.hanson-plywood.co.uk for bulk - they sent me samples recently and appear to be very good Finnish birch ply.
Best
Dave
Best
Dave
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Re: 6mm Birch Plywood
What are the delivery charges like for Finland ?Daven wrote:I use SLEC Ltd as I have a storage issue but you could try http://www.hanson-plywood.co.uk for bulk - they sent me samples recently and appear to be very good Finnish birch ply.
Best
Dave
Re: 6mm Birch Plywood
ScandalousLightnin wrote:What are the delivery charges like for Finland ?
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Re: 6mm Birch Plywood
touché
-
- Posts: 152
- Joined: Sun Jan 18, 2015 6:38 pm
- Contact:
Re: 6mm Birch Plywood
thanks for the information on Slec... I have some great material and its about 30% cheaper than my last supplier...
LS3060 PLUS with a 60w tube, Chiller and Bofa filter
Online Store http://www.t2kreations.co.uk
Personal Website... http://www.timbobtastic.com
Online Store http://www.t2kreations.co.uk
Personal Website... http://www.timbobtastic.com
Re: 6mm Birch Plywood
Couldn't agree more with Slec. Used them for years and never had any issues
Hps 6090 pro lasercut 5.3
Who is online
Users browsing this forum: Ahrefs [Bot] and 2 guests