Hi
I’ve been cutting some mirrored acrylic on my Ls3040 60w and I keep getting what I describe as burn marks on the reflective part. Power is 97 speed is 8. I’ve cut it successfully on these settings - do you think this suggests it needs aligning?
Thanks!
Cutting mirrored acrylic
-
- Posts: 5
- Joined: Sat Nov 07, 2020 4:28 pm
- Contact:
-
- Posts: 5
- Joined: Sat Nov 07, 2020 4:28 pm
- Contact:
Re: Cutting mirrored acrylic
Should add that it’s cutting fine on other materials.
Re: Cutting mirrored acrylic
Mirror can be tricky - cut on the back if possible and more speed less power - I would expect speed around 22 at 65 power.
Best
Dave
Best
Dave
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
-
- Posts: 7
- Joined: Wed Sep 04, 2019 12:03 pm
- Contact:
Re: Cutting mirrored acrylic
We cut mirror from the back, sometimes using multiple fast passes to reduce marking
Who is online
Users browsing this forum: No registered users and 1 guest