LS3020 power settings

Moderators: HPC, Daven

Post Reply
Daven
Posts: 1632
Joined: Fri Oct 15, 2010 6:44 pm
Location: Devon
Contact:

LS3020 power settings

Post by Daven »

This list is what I have found to give best results. I use a counter on the power control knob so the number relates to 'Number of turns'.

Felt = P 0.80 50mms

Laminate
Engrave = P 0.80 100mms
Cut = P 1.15 30mms 2 passes

Rubber
Engrave = P 4.80 80mms 2 passes

2mm Acrylic = P 3.60 15mms

3mm Acrylic = P 3.25 10mms

5mm Arcylic = P 5.30 10mms

3mm Ply = P 4.00 15mms

3mm MDF = P 3.90 15mms
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests