LaserCut 5.3 Shortcuts

Moderators: HPC, Daven

Post Reply
llamalasers
Posts: 159
Joined: Thu Apr 03, 2014 10:17 pm
Contact:

LaserCut 5.3 Shortcuts

Post by llamalasers »

Just accidentally discovered that ctrl+G opens the size/scale options in LaserCut.
This will shave seconds off my processing times so thought I'd share.

Any other useful LaserCut shortcuts?
60W LS6840 & CW4000
started out with LS3040
Daven
Posts: 1632
Joined: Fri Oct 15, 2010 6:44 pm
Location: Devon
Contact:

Re: LaserCut 5.3 Shortcuts

Post by Daven »

Shift J = pick
Ctrl Y = centre to table
Zoom out = F3
Zoom to objects = F4
Zoom to Table shift = F4
Array F9

They are noted in the menus ;)
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
llamalasers
Posts: 159
Joined: Thu Apr 03, 2014 10:17 pm
Contact:

Re: LaserCut 5.3 Shortcuts

Post by llamalasers »

Daven wrote:They are noted in the menus ;)

:oops:

Sometimes I overlook the most obvious things.
60W LS6840 & CW4000
started out with LS3040
Daven
Posts: 1632
Joined: Fri Oct 15, 2010 6:44 pm
Location: Devon
Contact:

Re: LaserCut 5.3 Shortcuts

Post by Daven »

:D me too ;)
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests