Cutting shapes

Moderators: HPC, Daven

Post Reply
MasonsAttic
Posts: 8
Joined: Mon Sep 22, 2014 8:25 am
Contact:
Contact MasonsAttic

Re: Cutting shapes

Post by MasonsAttic »

Thank you :D
Top
keithwright
Posts: 19
Joined: Tue Oct 14, 2014 2:08 pm
Contact:
Contact keithwright

Re: Cutting shapes

Post by keithwright »

'Inkscape' is a piece of free software that will save in dxf formate and others.

Cheers

Keith
Top
Spooky
Posts: 1291
Joined: Mon Apr 26, 2010 10:17 pm
Contact:
Contact Spooky

Re: Cutting shapes

Post by Spooky »

If you want CAD based try Draftsite, also free and made by Dassault Systems the maker of Solidworks

cheers

Dave
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Dave@OpticalPower.co.uk
Top
llamalasers
Posts: 159
Joined: Thu Apr 03, 2014 10:17 pm
Contact:
Contact llamalasers

Re: Cutting shapes

Post by llamalasers »

I use the free DoubleCAD XT5 and export shapes to 2003 .dxf format, works perfectly with LaserCut 5.3
60W LS6840 & CW4000
started out with LS3040
Top
Post Reply

Return to “Help or advice required please”

Who is online

Users browsing this forum: No registered users and 53 guests