Mirror Alignment 3040
Mirror Alignment 3040
Hi I’m still getting a little confused on which way to adjusted the thumbscrews on the back of the mirrors and what screw mover the mirror left / right / up /down , have anyone got a diagram / drawing that I can print out please
Re: Mirror Alignment 3040
There are various videos on Youtube that may help.
As a rough guide, screwing in the bolt moves the beam away from the screw - so say the screw was bottom left, 7 o'clock it would move the beam towards 2 o'clock. Turn the screw in small amounts - I imagine it as a clock face so turn the screw say 10 seconds clockwise - if that is wrong I can turn it back 10 seconds and start again
Best
Dave
As a rough guide, screwing in the bolt moves the beam away from the screw - so say the screw was bottom left, 7 o'clock it would move the beam towards 2 o'clock. Turn the screw in small amounts - I imagine it as a clock face so turn the screw say 10 seconds clockwise - if that is wrong I can turn it back 10 seconds and start again
Best
Dave
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Re: Mirror Alignment 3040
Thank you
Who is online
Users browsing this forum: No registered users and 5 guests