Laserscript user forum

No problems and welcome
Best
Dave

Hi Zoe - I do not use Mac's or lightburn so can't help but I bet if you called HPC someone will help you out

Best
Dave

file, Machine Options, worktable

Yep that is the same on mine - if you press datum it will re-set back to the top on it's own.
The speed is slow though - should be quicker than that - make sure the belt isn't slipping.

Best
Dave

Give HPC a call - it will be quicker than trying to troubleshoot here

Best
Dave

No problems - DPI = dots per inch - so resolution.

In Lasercut 5.3 - double click on the speed power and set scan gap there

Best
Dave

More speed = less darker/deep Less power = same as above Less DPI (Scan gap) = same as above So increase speed and reduce power and check scan gap settings. Too much speed is not good so check manual or give HPC a call, I normally keep to less than 400 mm/s Scan gap setting can be found here http://...

I use chlorine granules you can buy for hot tubs at DIY sheds - just a teaspoon full seems to help every few months.
Best
Dave

PM sent

Hi Chris - you will need the drivers for the key as well - I will email them over
Best
Dave