Hi folks, the wife has asked me to make a couple of chopping boards for her sisters (Christmas eh)
Anyway, do you have any tips advice? I tried a quick logo on a used one and it came our great, but a little deep engraved. It was also colourless....How do I get that nice dark colour in the engraving like I see on sale everywhere?????
Thanks in advance...
oh and a bonus question, what settings for cork cutting and engraving?? It's not listed on my HPC info so just wanna ask the great masses on here
Bamboo Chopping Boards
Re: Bamboo Chopping Boards
You could try a higher scan gap setting but lower the power or up the speed if you can.
Not sure about cork - not tried cutting it so far
Best
Dave
Not sure about cork - not tried cutting it so far
Best
Dave
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Re: Bamboo Chopping Boards
Thanks, I think it's a case of experimenting I tried higher power, didn't make any difference. Tried slower speed, didn't make any difference. I will try the scan gap to see if it makes a difference.
Re: Bamboo Chopping Boards
Bamboo doesn't go very dark from memory - it maybe that the ones you have seen has a paint or dye infill.
Best
Dave
Best
Dave
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Re: Bamboo Chopping Boards
I did wonder that too. Have asked a few creators i follow online, they all assure me there is no paint involved
Thought someone on here or at HPC might have known the answer.
Chhers for the help though Daven
Thought someone on here or at HPC might have known the answer.
Chhers for the help though Daven
Re: Bamboo Chopping Boards
The only other thing you could try is de-focusing as well.
Best
Dave
Best
Dave
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Re: Bamboo Chopping Boards
Hi,
Just came across this post when looking for bamboo speeds and power. I've recently been cutting 3mm cork on my LS3060 at 15 speed on 45 power, 20 in the corners, though these were cloud shapes so not many corners. I found originally that cork tends to char and burn at higher power, but 45-50 seems to be the sweet spot. I lowered that to 40 power for 1mm cork though.
Hope that helps someone!
Dave
Just came across this post when looking for bamboo speeds and power. I've recently been cutting 3mm cork on my LS3060 at 15 speed on 45 power, 20 in the corners, though these were cloud shapes so not many corners. I found originally that cork tends to char and burn at higher power, but 45-50 seems to be the sweet spot. I lowered that to 40 power for 1mm cork though.
Hope that helps someone!
Dave
Who is online
Users browsing this forum: No registered users and 6 guests