Windows 10 Drivers

Please read before posting to the forum

Moderators: HPC, Daven

Darryn
Posts: 7
Joined: Mon Mar 18, 2013 2:55 pm
Contact:

Re: Windows 10 Drivers

Post by Darryn »

Ive just run into this problem and I cannot find my software disk, is there any chance someone could email me the windows7 x64 drivers or possibly a link to somewhere I could download them. Thanks in advance, Darryn. Dreeder@DreederUK.com
ednotdave
Posts: 19
Joined: Fri Oct 16, 2015 5:39 pm
Contact:

Re: Windows 10 Drivers

Post by ednotdave »

Darryn - just emailed you. Let me know if it's what you wanted...
Ed
Newbie attempting to use a LS3060 60W + CW4000 + Lasercut 5.3 :shock:
Darryn
Posts: 7
Joined: Mon Mar 18, 2013 2:55 pm
Contact:

Re: Windows 10 Drivers

Post by Darryn »

Thanks very much Ed,

I should have replied sooner, I phoned HPC and Chris sent the files to my dropbox, so it is all back up and running.

Thanks again, Darryn.
mickthemagpie
Posts: 29
Joined: Fri May 14, 2010 5:30 pm
Contact:

Re: Windows 10 Drivers

Post by mickthemagpie »

Quick question. If i upgrade from Windows 8.1 to 10 on a laptop already using Lasercut 5.3 do i still need to follow the steps in the original post or will it work anyway?

Cheers

Mick
Tom
Posts: 322
Joined: Mon Sep 19, 2011 6:15 pm
Contact:

Re: Windows 10 Drivers

Post by Tom »

Yes
You might have too turn the digital signatures off
Daven
Posts: 1635
Joined: Fri Oct 15, 2010 6:44 pm
Location: Devon
Contact:

Re: Windows 10 Drivers

Post by Daven »

All I had to do was re-install Lasercut - don't overwrite the config file when asked ;)

Best
Dave
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
jotech
Posts: 10
Joined: Wed Mar 10, 2010 1:20 pm
Contact:

Re: Windows 10 Drivers

Post by jotech »

I am trying to connect my 6540H to a new laptop with windows10 (The old machine has died :cry: ) but I can not get it to find the drivers despite copying eveything onto the new hardrive.

Is there a link I get to obtain the drivers for windows 10 please?

Cheers
John
Daven
Posts: 1635
Joined: Fri Oct 15, 2010 6:44 pm
Location: Devon
Contact:

Re: Windows 10 Drivers

Post by Daven »

They should be on your disk that lasercut is on - there is no link I know of for them.

Best
Dave
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
jotech
Posts: 10
Joined: Wed Mar 10, 2010 1:20 pm
Contact:

Re: Windows 10 Drivers

Post by jotech »

The machine was delivered to me and setup for me by the HPC laser guy, The chap that installed the machine did not give me a disk because he only brought his own install disk. it's a real pain not being able to use the laser now. I will email HPC direct and see if they can help

thank you
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests