download problem

Moderators: HPC, Daven

Post Reply
mauricedarley
Posts: 3
Joined: Tue Oct 08, 2019 3:54 pm
Contact:

download problem

Post by mauricedarley »

I knew it wouldn't be long!!

We cant download files from a usb stick to the laser. We have to import it on to the laptop screen then save it in documents then wipe the screen and open the saved version. then it downloads fine.

Is there a shorter way?

Our old lasercutter doesn't have this problem.

Many thanks in adv for any suggestions.
Daven
Posts: 1632
Joined: Fri Oct 15, 2010 6:44 pm
Location: Devon
Contact:

Re: download problem

Post by Daven »

So are you saving the work in LaserCut to a USB stick and then trying to load from the usb stick or are you saying LaserCut won't save to USB?

What version of Lasercut?

Best
Dave
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
mauricedarley
Posts: 3
Joined: Tue Oct 08, 2019 3:54 pm
Contact:

Re: download problem

Post by mauricedarley »

Thanks for speedy reply.

its Lasercut 5.3

I am exporting from 2d design onto a usb stick as a dxf.
Then I put the stick into the laptop. That's when I have to save to documents.
Daven
Posts: 1632
Joined: Fri Oct 15, 2010 6:44 pm
Location: Devon
Contact:

Re: download problem

Post by Daven »

You can't use dxf direct to the laser so import it to LaserCut and then download to the usb - it will download different files that contain the machine settings etc.

Best
Dave
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 9 guests