Looking for some cardboard box software

Moderators: HPC, Daven

Post Reply
JohnStevenson
Posts: 12
Joined: Sat Jul 28, 2012 10:18 am
Contact:

Looking for some cardboard box software

Post by JohnStevenson »

Something cheap to do small boxes that slot together for small parts to fit inside drawers in a workshop.

Many thanks.
John Stevenson, Nottingham, England.
LS 3040 Pro, Techo Isel Router, Vectric software.
PhillyDee
Posts: 622
Joined: Fri Apr 08, 2011 12:25 am
Contact:

Re: Looking for some cardboard box software

Post by PhillyDee »

http://boxmaker.rahulbotics.com/

All I can offer!

You will need a pdf to dwg converter, then you will need to scale it in cad using the bounding box.
http://www.tmbelectronics.com - Electronics, tools, hobby tools, power tools, and much more!

An ex LS3020 user now playing with an LS6840PRO (60W) and an LS1290PRO (80W)
JohnStevenson
Posts: 12
Joined: Sat Jul 28, 2012 10:18 am
Contact:

Re: Looking for some cardboard box software

Post by JohnStevenson »

Thanks, book marked it for later but was wanting cardboard boxes, probably quicker to design my own.

I'm sure I saw a similar site but just for boxes ?

Incidentally V Carve Pro and Cut 2D from Vectric will open a PDF file and then export it to a DXF with out doing any work.
I don't have Corel draw and use V carve for all my design work then load into Lasercut.
John Stevenson, Nottingham, England.
LS 3040 Pro, Techo Isel Router, Vectric software.
JohnStevenson
Posts: 12
Joined: Sat Jul 28, 2012 10:18 am
Contact:

Re: Looking for some cardboard box software

Post by JohnStevenson »

To answer my own post [ sign of a demented mind ? ] with some help from the Sawcreek forum, Matt over there suggested that Inkscape had a built in extension to do this. Extension > Raster > Fold box
John Stevenson, Nottingham, England.
LS 3040 Pro, Techo Isel Router, Vectric software.
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests