Laserscript user forum

Ouch.
My 3060's have tinted acrylic! Worth asking HPC

Sorry - I don't have one - maybe email HPC?
Best
Dave

Hi - yes it should be part of the install disk - have you got it to transfer to the machine (if successful the machine will beep).

It may be worth calling HPC and getting the correct version for the card you have as well in case it is not the original disk.

Best
Dave

No problems and welcome
Best
Dave

Hi Zoe - I do not use Mac's or lightburn so can't help but I bet if you called HPC someone will help you out

Best
Dave

file, Machine Options, worktable

Yep that is the same on mine - if you press datum it will re-set back to the top on it's own.
The speed is slow though - should be quicker than that - make sure the belt isn't slipping.

Best
Dave

Give HPC a call - it will be quicker than trying to troubleshoot here

Best
Dave

No problems - DPI = dots per inch - so resolution.

In Lasercut 5.3 - double click on the speed power and set scan gap there

Best
Dave

More speed = less darker/deep Less power = same as above Less DPI (Scan gap) = same as above So increase speed and reduce power and check scan gap settings. Too much speed is not good so check manual or give HPC a call, I normally keep to less than 400 mm/s Scan gap setting can be found here http://...